The Ventüer VL-50CM is a fine bladed screening louvre with a concealed mullion support system.
Technical Data Sheet
Fixing Detail - Fibre Cement Cladding
Fixing Detail - Precast Concrete
Fixing Detail - Horizontal Profiled Metal Cladding
Fixing Detail - Vertical Profiled Metal Cladding
Fixing Detail - Brick Veneer
Fixing Detail - Screw Fixed To Window Joinery
Fixing Detail - Glazed To Window Joinery
Need to establish louvre panel sizing for a given airflow and pressure drop? Click to access the ventilation lovre calculator
The Ventüer VL-50CM is designed primarily as a screening louvre and provides a low pressure drop allowing maximum airflow with minimum mechanical assistance. It has very low rain defence effectiveness and should not be used where protection from wind driven rain is required.
The Ventüer VL-50CM louvre blades are supported on a concealed mullion system, and bordered by a 150mm perimeter frame. It shares the same support frame as the high-performing VL-3SD and VL-2SD systems, and can be combined with these products to provide cost saving configurations. The standard frame can be fixed in to a wide range of primary support structures and cladding types, including profiled metal cladding, fibre cement sheet, window joinery systems and others.
The Ventüer VL-50CM can be fitted with a sealed solid backing panel to provide a water-tight rainscreen in areas where the louvres are "inactive", or not required for air flow. It can also be fitted with bird or insect mesh, and can be coupled with the Ventüer range of air control and fire dampers.